/ applications /

Sandblasting and shot blasting machines for additive manufacturing and 3D printing

 

3D-printed drill housing compared with the original component

 

Sandblasting and shot blasting machines for 3D printing and Additive Manufacturing are used in component post-processing, helping complete the production process after the part has been made.

 

Additive Manufacturing allows complex geometries and customised components to be produced, but printing is only one part of the process. To achieve uniform surfaces prepared for subsequent operations, post-processing plays a fundamental role.

 

In the field of 3D printing and rapid prototyping, sandblasting and shot blasting remove production residues and unsintered powder, even out surfaces and reduce imperfections.

 

The treatment also prepares metal and polymer components for subsequent finishing, painting, coating or surface treatment.

 

The choice of abrasives, beads and different grain sizes makes it possible to adapt the treatment to the material and desired result, targeting the required surface characteristics.

 

From printing to finishing: the value of the result.

 
 
 
 
 

3D-printed components after shot blasting

 

 

3D printing began in 1983 with stereolithography developed by Chuck Hull.

 

Why use a sandblasting machine in 3D printing?

Whether using powder bed technologies (such as SLS, SLM and DMLS) or extrusion and resin processes, surface treatment is selected according to the material and required result.

 

The inherent roughness of the printing process, structural supports and unsintered powder residues require precise treatment suited to the material.

 

Inadequate finishing can compromise component dimensional accuracy or surface quality.

 

For this reason, integrating sandblasting and shot blasting into the production workflow is an effective way to complete the Additive Manufacturing.

 

The choice of different abrasives, beads and grain sizes allows treatment to be adapted to component characteristics and the required surface finish.

 
 
 
 
 

Sandblasting machines for Additive Manufacturing

The models shown are some of the recommended sandblasting machines. Different configurations are available depending on production requirements. To choose the most suitable solution, you can arrange a test in our LAMPO-LAB or send us your samples. We assess abrasives, parameters and finish on the actual component.

 

LAMPO-LAB surface finishing test laboratory

 

 

 

3D-printed component showing an untreated half and a sandblasted half

 

 

 
 
 
 
 

Manual sandblasting machine with cyclone


Manual sandblasting machine

 

LC/05 sandblasting machine

 

Sandblasting machine with cyclone for manual processing, abrasive recovery and dust separation.

 

Manual and automatic sandblasting machine


Sandblasting and shot blasting machine with rotating table for Additive Manufacturing

 

LC/2 TR 350 CR sandblasting machine

 

Sandblasting machine with cyclone, manual workstation and automatic basket for small parts.

Automatic rotary basket sandblasting machine


Sandblasting and shot blasting machine with rotating basket for Additive Manufacturing

 

LC/550 and LC/551 CR sandblasting machines

 

Automatic sandblasting machine with a large basket for production of small and medium components.

 

 

...discover all Venturi sandblasting machines

 
 
 
 
 

Ioniser for electrostatic charges

Optional accessory for eliminating electrostatic charges generated during sandblasting and shot blasting. Particularly suitable for materials and components prone to electrostatic build-up, improving ease of use and production continuity.

Accessories and spare parts Read more

 

 
 
 
 
 

How to choose a sandblasting machine

Choosing a sandblasting machine for Additive Manufacturing and 3D printing depends on component quantities, dimensions and geometry.

 

Manual sandblasting machines

Sandblasting machines available in different sizes, from compact benchtop cabinets to models with a large working area, suitable for powder removal and finishing of 3D-printed components.

 

Manual and automatic sandblasting machines

Hybrid configurations allow the same sandblasting machine to process small 3D-printed components automatically in bulk in the basket and larger components to be processed manually.

 

Automatic rotary basket sandblasting machines

Sandblasting machines suited to series production of 3D-printed components. They allow operators to adjust and maintain consistent key parameters.

Main applications

 

  • Finishing metal components (SLM/DMLS): surface treatment after loose powder removal, using abrasives and parameters suited to the component.

 

  • Surface finishing: roughness reduction for a more regular, uniform surface and a quality finish.

 

  • Preparation for painting: creation of uniform surface roughness to improve adhesion of paints, colours and coatings.

 

  • Cleaning SLS and MJF components: fast, uniform removal of unsintered powder from polymer components such as Nylon and PA12.

 

  • Treatment of medical components: finishing implants and prostheses using appropriate abrasives and processing parameters.

 
 
 
 
 

Looking for the right sandblasting and shot blasting machine for Additive Manufacturing?

Complete our enquiry form to receive all the information you need.

send us an enquiry
 
 
 
Ultimo aggiornamento: 06/10/2026