Both treatments can use the same machine. Angular abrasive cuts more incisively; spherical media mainly produce a hammering action. Choose according to the component and finish. Brown and white aluminium oxide and angular metallic grit have irregular, sharp particles. Media, grain size and pressure determine removal and roughness. For oxide, mill scale, paint and residue removal or roughness preparation before painting, electroplating and coatings. Brown and white aluminium oxide and angular metallic grit, in suitable grain sizes. Glass beads, ceramic beads and spherical metallic shot mainly hammer the surface rather than cut it, producing uniform or satin finishes. For steel, stainless steel, aluminium and alloys, CNC or EDM parts, moulds and certain deburring operations. They differ in hardness, fragmentation resistance and behaviour. Test both on the component to compare the finish. The projected medium, its geometry, grain size and settings determine cutting or hammering action and the result. Not necessarily. A compatible cabinet can perform both. Thoroughly clean the machine and recovery circuit when changing media to avoid contamination. It separates dust, residues and unsuitable material from reusable media, stabilising the mixture and finish. No. Cyclones are also used for sandblasting; the medium and surface action define the process. Use angular abrasive for incisive cleaning or roughness; spherical media for uniform satin finishing. Adjust parameters for the component. Lampo-Lab compares beads and aluminium oxide on real parts to assess finish, roughness and processing time. What is the main difference? When is sandblasting preferable? When is shot blasting preferable? Can one machine do both?
What are the differences?
How does sandblasting work?
When should you choose sandblasting?
Which abrasives are used?
How does shot blasting work?
When should you choose shot blasting?
How do glass and ceramic beads differ?
What is the main process difference?
Are the machines different?
What does the cyclone do?
Does a cyclone define a shot blasting machine?
How do you choose the treatment?
Why carry out tests?
FAQ – Frequently asked questions
🎯 Angular media cut and remove material; spherical media mainly hammer and uniform the surface.
🎯 For removing resistant residues or preparing roughness for coatings.
🎯 For uniform or satin finishing on suitable technical surfaces.
🎯 Yes, when compatible with both media and thoroughly cleaned between changes.
