Before choosing a machine, tests on real components verify the finish and define the machine, abrasive and processing parameters. Material, abrasive, grain size, pressure and treatment time all influence the surface. Laboratory trials compare manual Venturi and pressure machines and automatic rotating baskets for suitable bulk small parts. Steel, stainless steel, aluminium, brass, other alloys and plastics respond differently. Even identical materials may require different parameters because of their initial surface condition and required result. Controlled changes to abrasive, grain size, pressure and time identify a suitable process. Tests directly verify removal of oxides, mill scale, paint, residues and contamination, or the required satin, matt or uniform finish. A treated sample provides a practical reference for later trials and production. Angular aluminium oxide provides stronger removal and roughness creation. Glass and ceramic beads are used mainly for uniform satin surfaces. Comparing different media and grain sizes on the same part shows the differences directly. Where appropriate, compare different systems: abrasive acceleration affects removal capacity, processing speed and cycle behaviour. Compressed air creates suction to draw abrasive into the gun. Adjust pressure, media, grain size and distance from the component. Venturi systems are versatile for cleaning, satin finishing, deburring and surface preparation. A pressurised vessel feeds abrasive directly to the nozzle, generally providing greater abrasive delivery and impact energy. Tests determine whether that extra removal capacity is needed and compare productivity with Venturi blasting. For screws, small metal parts and components suitable for bulk processing, test blasting and blow-off times, basket speed, pressure, gun distance and position. Check both individual finish and uniformity across the batch. Visual comparison is the first check. Further samples can be produced by changing one parameter at a time and comparing the results. Compare glass and ceramic beads or different aluminium oxide grain sizes. Record the selected sample alongside the parameters used to produce it. A roughness tester measures surface parameters and shows how abrasive, grain size, pressure and exposure time affect preparation for coatings, painting or bonding. A microscope reveals details that are difficult to see unaided and helps assess uniformity and the effects of different media. It complements roughness measurement and sample comparison. The parameters that achieve the finish provide a basis for choosing a manual Venturi machine, a pressure system or automation suited to component quantity and geometry. Compare finish and productivity on the same component. Venturi suits versatile processes with compatible removal requirements; pressure is useful for higher impact energy or productivity. For repeated batches of suitable small parts, basket trials assess movement, surface exposure and repeatability. Validated settings provide a reference for the automatic cycle. Start with the component, its initial surface and the required finish, then define media, grain size, blasting system and parameters. Lampo-Lab offers manual Venturi and pressure machines and an automatic rotating basket for bulk small parts. Trials compare media, grain sizes and operating settings. Compare treated and untreated samples and, when needed, use a roughness tester and microscope to document differences. A trial verifies the achievable finish, necessary parameters and appropriate machine type. It reduces uncertainty in selecting the machine, abrasive, blasting system and automation level. Can you test your own components? Can you compare Venturi and pressure machines? Can you test bulk small parts automatically? How is the finish checked?
Why are laboratory sandblasting and shot blasting tests important?
Why carry out sandblasting and shot blasting tests?
Why test the actual component?
How do abrasive and grain size affect the finish?
Which machines can be tested in the laboratory?
How does a manual Venturi trial work?
When should you test a pressure machine?
When should you test an automatic rotating basket?
How is the finish assessed after a trial?
Why compare different treated samples?
How is surface roughness measured?
Why inspect the surface under a microscope?
How do tests lead to machine selection?
How do you choose between Venturi and pressure blasting?
When is automation worthwhile?
Why does the test laboratory help machine selection?
What can be tested at Lampo-Lab?
How is the finish checked at Lampo-Lab?
Why test a machine before buying it?
FAQ – Frequently asked questions
🎯 Yes. Actual components allow direct comparison of media, grain sizes and processing parameters.
🎯 Yes. Test the same component to compare removal capacity, processing speed and finish.
🎯 Yes, with an automatic rotating basket and adjustable blasting and blow-off times, basket speed, pressure and gun position.
🎯 By sample comparison and, when required, a roughness tester and microscope.
